Hardware Products

Telescada's ATS-8CCM is a field proven instrument designed for the real-time monitoring, alarming, data logging and control of Natural Gas and Petroleum Transmission & Distribution Impressed Currrent Cathodic Protection Systems. It's small NEMA 4X plastic reinforced fiberglass enclosure makes the ATS-8CCM ideally packaged for a range of permanent or portable installation locations. The ATS-8CCM communicates wirelessly to relay up to 4 (four) real-time current or voltage conditions to a central SCADA system or PC Master Controller. Up to 4 (four) digital status channels alarm upon conditions of loss of rectifier main AC power, or yard intrusion. The ATS-8CCM automatically reports any out of range conditions and transmits all monitored values for review, analysis and action.

PRODUCT FEATURES Real-Time Alarming 24/7 Data Recording 4 Analog Channels Current Voltage Temperature 4 Status Channels Main AC Power Intrusion AC Powered, or Battery Power with Solar Charging
Communication Options		AC powered with a deep cycle sealed lead acid battery, back-up trickle charged by an internal charger, or battery powered with solar charging. the ATS-8CCM is quickly mounted on a pipe, post or telephone pole in any outdoor environment. Modular voltage transducers are mounted within the ATS-8CCM enclosure providing easy access for field calibration. The optional LDM-220 Local Display provides a quick on-site review of all monitored values with the press of a button. The Telescada T-Link™ Software Utility is the virtual control panel for the ATS-8CCM. T-Link™ provides local configuration, calibration and on-site data retrieval for a network of Telescada ATS Series RTUs. Using any of the ATS Series communications options allows the ATS-8CCM's recorded data and alarms to be sent to a central SCADA system for review, analysis and action. The TelescadaMASTER™ Remote Database and Communications Controller is a user-friendly Master Controller designed to provide complete remote or local operational control of a network of Telescada ATS-8CCM series instruments. CP Engineers use the TelescadaMASTER™ to monitor up to 500 ATS-8CCM field instruments. Remote configuration, data retrieval, polling and alarm handling is all managed from the desktop with ease. The TelescadaMASTER™ Controller is designed to run on any standard PC using the Windows® operating system, where you own, manage and maintain access to your system information, not some 3rd party looking to charge you a monthly access fee
Dial-Up CDMA 1xRTT GSM 900MHz ISM VHF/UHF Licensed Radio
Protocol Support
Telescada Native with Report by Exception MODBUS RTU DNP3 Custom On Request
Download the ATS-8CCM Product Brief Here