|
ATS-8CF Gas Distribution Remote
Terminal Unit
Telescada's ATS-8CF is a field proven instrument
designed for the real-time monitoring, alarming, data
logging and control of Natural Gas Distribution pressure,
flow and/or temperature. It's plastic reinforced fiberglass enclosure
makes the ATS-8CF ideally packaged for a variety of locations. The
ATS-8CF communicates wirelessly to relay up
to 4 (four) real-time pressure, flow or temperature
conditions to a central SCADA system. Up to 4 (four) digital
status channels alarm upon conditions of elevated water
levels or intrusion. Up to 4 (four) control output channels
can be configured to remotely operate dry contact switches
where needed. More than a simple electronic recorder, the
ATS-8CF automatically reports any out of range conditions and
transmits all monitored values for review, analysis and
action.
|
PRODUCT FEATURES
Real-Time
Alarming
24/7 Data Recording
4 Analog Channels
Pressure
Flow
Temperature
4 Status Channels
Water
Level
Intrusion
4 Control Output Channels
Switches
Actuators
|
 |
 |
|
Communication Options
|
|
Powered by a deep cycle sealed lead acid battery, trickle
charged by a solar charger, the ATS-8CF is quickly mounted
on a vent pipe or post in any Class 1, Div. 2 environment.
Intrinsically safe, solid state modular pressure
transducers are mounted within the ATS-8CF enclosure
with optional Swagelock® valves providing easy access
for field calibration. The optional LDM-220 Local
Display provides a quick on-site review of all
monitored values with the press of a button.
The Telescada T-Link™ Software Utility is the
virtual control panel for the ATS-8CF. T-Link™
provides local configuration, calibration and on-site
data retrieval for a network of Telescada ATS Series
RTUs. Using any of the ATS Series communications
options allows the ATS-8CF's recorded data and alarms
to be sent to a central SCADA system for review,
analysis and action. |
- Dial-Up
- CDMA 1xRTT
- GSM
- 900MHz ISM
- VHF/UHF Licensed Radio
|
|
|
Protocol Support
|
|
- Telescada Native with Report by Exception
- MODBUS RTU
- DNP3
- Custom On Request
|
|
|
Download the ATS-8CF Product Brief Here
|
|
Hardware Products